Coating Thickness & Inspection Equipment
DMV UK have a wide range of hand held instruments for the coatings industry including coating thickness gauges which will accurately measure dry film thickness of paint coatings, metal plating, anodising and zinc galvanizing. We also supply associated equipment essential for ensuring the correct application and quality of coating systems : Dew Point Meters, Soluble Salt Testers and Surface Profile Gauges including Replica (Testex) Tape Readers.
Our Range of Coating Thickness & Inspection Equipment
TWO MODELS - PosiTest DFT Ferrous measures non-magnetic coatings on steel - PosiTest DFT Combo measures both non-magnetic coatings on steel AND non-conductive coatings on aluminium, brass, etc. Automatically recognizes the substrate.
rugged, weatherproof coating thickness gauges for accurate measurement of dry film paint thickness on all metal substrates. Calibration certificate and 2 year warranty. Interchangeable probes compatible with all gauge bodies. Standard or Advanced option.
PosiTector Inspection Kits contain a PosiTector gauge body (Standard or Advanced) and 3 probes - coating thickness, environmental and surface profile, plus accessories in a convenient hard shell carrying case. Build your own - custom kits also available.
Measures and records the peak to valley surface profile height of abrasive blast cleaned surfaces. 50 readings per minute for quick and accurate measurement of surface profile over large flat surface areas. Calibration certificate and 2 year warranty.
The PosiTector RTR Replica Tape Reader measures and records surface profile parameters using Testex replica tape. Two probe versions - the RTR-H measures peak height, and the RTR-P measures peak height and peak density. Conforms to national and internatio
The PosiPen is a simple magnetic type coating gauge which can be placed with pin-point accuracy on extremely small parts, and on peaks and valleys. Ideal for measuring non-magnetic coatings such as paint, enamel, plating, hot-dip galvanizing on steel.
Measures uncured powder coatings using ultrasonic technology to automatically calculate and display a predicted cured thickness on both ferrous and non-ferrous substrates. The wireless probe communicates with a base unit up to 10m away.
COATING THICKNESS MEASUREMENT GUIDE The choice of coating thickness gage depends on the type of coating, the shape and type of substrate, the thickness of the coating, the cost of the equipment and the accuracy required. The most commonly used techniques include non-destructive dry film thickness methods such as magnetic, eddy current, and ultrasonic. Wet film thickness measuring equipment is also available for powder and liquid coatings before curing. There are four main types of dry film thickness gauges available - magnetic pull-off, electromagnetic induction, eddy current and ultrasonic. Magnetic gauges are used to measure the thickness of non-magnetic coatings on ferrous substrates such as steel and iron. Magnetic pull-off gauges use a permanent magnet. As the coating thickness increases, the pull off force is reduced and this measurement of force is transferred to a graduated scale from which the coating thickness can be read. Electromagnetic induction instruments use a probe which produces a magnetic field. The magnitude of flux density produced is measured and this measurement is related to the distance between the probe and the metal substrate. The instrument converts the flux density measurement to a paint thickness reading on the instrument display. Eddy current instruments are used to measure the thickness of non-conductive coatings on non-ferrous metal substrates. The instrument probe produces eddy currents on the test surface. The paint thickness and the substrate characteristics affect the magnitude of the eddy currents. The eddy currents create an opposing electromagnetic field and this is measured by the main coil or by a second adjacent coil. Ultrasonic instruments can be used to measure the thickness of coatings on non-metal substrates (plastic, wood, etc). The probe transducer transmits ultrasound through the coating and this sound wave is reflected off the substrate surface and back to the probe. The instrument measures the time interval between the excitation pulse that generates the sound wave and the first returning echo. This time interval between is then converted to a thickness reading on the instrument display.