Our Products
A top specification gauge with selectable high resolution display options (A-Scan, B-Scan, & Large Digits) & adjustable gain. 12,000 page data storage. Kit includes probe, software, data cable, carrying case & NIST Calibration Certificate.
The Mini-Max Ultrasonic Bolt Tension Monitor is first cost-effective ultrasonic solution available on the market. It measures the bolt elongation produced by tightening a threaded fastener.
The PVX v2.0 is an advanced precision A-Scan scope with versatility and transducer options offering a measuring range from very thin to extremely thick, with exceptional resolution. Supplied with transducer & calibration certificate.
Dew Point Meters for Environmental Monitoring Measures and records climatic conditions including: relative humidity, air temperature, surface temperature, dew point temperature, wind speed, and difference between surface and dew point temperatures.
The Cygnus 2PLUS is a simple to use, multi-mode thickness gauge having Multiple-Echo, Echo-Echo and Single-Echo capabilities. The NEW high durability end-mounted rotatable LCD display makes it ideally suited for climbing and rope access.
Touchscreen torque instrument for testing the applied and released torque of a diverse range of products. Measures up to 10 Nm to capture opening and closing torque of caps/closures intended to be opened by hand. Supplied with calibration certificate and
The VFG is an advanced digital force gauge built for tough environments. Powered by Vector OS which enables operators to analyse test results quickly in the field, and to customise the touchscreen interface. 10 models ranging from 2.5 to 2500 N.
The Orbis cap torque tester is ideally suited to a wide range of screw-type closures and other components where application and removal torque need to be measured accurately.
Portable gloss measurement for all surfaces finishes. Select from 3 probe models: GLS 60, GLS 20/60, and GLS 20/60/85. Automatic Diagnosis and Auto Calibration. Fast measurement speeds of 60+ readings per minute.
TWO MODELS - PosiTest DFT Ferrous measures non-magnetic coatings on steel - PosiTest DFT Combo measures both non-magnetic coatings on steel AND non-conductive coatings on aluminium, brass, etc. Automatically recognizes the substrate.
Measures the force required to pull a specified test diameter of coating away from metal, wood, concrete & other substrates. Pressure is displayed on a digital display. PosiTest AT-A has an automatic hydraulic pump, the PosiTest AT a manual hydraulic pump
This portable hardness tester uses the dynamic Leeb rebound technique, has a wide measuring range and is suitable for most metals. Displays readings in hardness scales HRB, HRC, HV, HB, HS, HL.
The AD-300 analogue durometer is available in; Shore A, D, C, and O. With superb build quality, this durometer fully meets the requirements of : - ISO 868 & ISO 7619 (A, D) and ASTM D 2240 (A, D, C, O). Optional memory pointer holds the reading until manu
measurement of multiple parameters at the touch of a button. Choice of 9 roughness parameters (Ra, Rz, Rt, Rp, Rv, Rsk, Rku, Rq, Rz1max) and 5 unfiltered parameters. Bluetooth wireless communication between display and measurement unit.
A high quality, robust digital force instrument. It can be used handheld or fixed to a manual or motorised test stand for excellent testing performance. Accuracy 0.25% of full scale. Supplied with calibration certificate and standard accessories.
The ZX series Dakota Ultrasonics thickness gauges are some of the toughest in the world and are backed by a 5 year limited warranty. Complete kit supplied including transducer & calibration certificate.
Small, lightweight and simple to use, this 60 degree gloss meter is suitable for most surface finishes such as paints, varnishes, printing ink, marble, granite, plastics, paper, polished brick and ceramic tiles etc. Resolution 0.1 Gu. Deviation 1.5 Gu
Coating Thickness Gages for ALL Metal Substrates. Rugged, fully electronic coating thickness gauges use magnetic and eddy current principles to measure coating thickness on both ferrous and non-ferrous metals, accurately and quickly.
Optional accessories for PosiTest AT and AT-A pull-off adhesion testers including 20mm and 50mm conversion kits, packs of dollies, adhesion kits and drilling templates.
The Surftest SJ-210 portable surface roughness tester combines high accuracy and measurement speed with innovative features creating a new class leader in surface inspection.
The AD-100 analogue durometer is available in; Shore B, C, DO, O and OO. Optional memory pointer holds the reading until manually reset. Supplied in a foam lined case with a NIST traceable calibration certificate.
The Mecmesin AFG is the most versatile & fully-featured digital force gauge on the market. Used hand-held or fixed to a manual or motorised test stand for testing under controlled speed conditions. The AFG is accurate to 0.1% of full scale.
Sonagel LTHT is a thick translucent couplant paste specifically designed for ultrasonic inspection at temperatures up to 250 C and is non-toxic and safe for the environment. Supplied in a 1 litre plastic tub.
The ZX-6 Dakota Ultrasonics multi-echo (through paint) thickness gauges are some of the toughest in the world and are backed by a 5 year limited warranty. Complete kit supplied including transducer & calibration certificate.
Compact pen type hardness tester with a wide measuring range suitable for most metals. Direct display of hardness values in HRB, HRC, HRA, HV, HB, HS & HL. Test at any angle. Simple handling and low test expenditure.
Coating Thickness Gauges for Non-Metal Substrates. Non-destructively measures a wide variety of applications using ultrasound. Measure coating thickness over wood, concrete, plastic, and more. Advanced models measure up to 3 layers with graphics.
A compact, simple to use ultrasonic thickness gauge offering unrivalled cost / performance ratio. Typically used for corrosion surveys and general thickness measurements on metallic & non-metallic materials.
With 3 angles of incidence (20, 60 & 85 degree), the MG268-F2 will measure high, medium and low gloss surfaces. Supplied with software and data transfer cable. Resolution 0.1 Gu. Deviation 1.5 Gu (0-120); 1.5% (120-2000).
The Surftest SJ-310 portable surface roughness tester is able to operate independently of mains power and make measurements on almost any part of a workpiece of practically any size.
The PosiTector SHD Shore Hardness Durometer is a hand held digital gauge for measuring the indentation hardness of non-metallic materials. Two models are available for different hardness ranges - Shore A and Shore D.
The MH600 is an advanced Leeb type portable hardness tester with special features including : colour TFT display, automatic detection of probe direction, IP65 protection rating & high / low tolerance alarm. Software and cable are included.
Housed in a tough moulded case & featuring a large data memory & scan mode for measuring minimum thickness over large test areas.
The functionality of a top line thickness gauge, plus flaw mode enabling fast and accurate flaw detection in welds, forgings or composite materials. DFX 7 with Broad Band Filter (1.8-19 MHz) and DFX 7+ with Broad Band & Narrow Band Filters 2, 5 & 10MHz
PosiTector Inspection Kits contain a PosiTector gauge body (Standard or Advanced) and 3 probes - coating thickness, environmental and surface profile, plus accessories in a convenient hard shell carrying case. Build your own - custom kits also available.
SJ-411 has many innovative features combined with high accuracy and competitive price making this instrument the new leader in its class. It has a large touch-screen, color-graphic LCD and can be used for skidded and skidless measurement.
The dynaROCK II works according to the Leeb rebound hardness test method for metallic materials. It is made in Germany by BAQ GmbH. Supplied with test block, impact device D, data transfer software and test certificate.
A Smart New Way to Measure... PosiTector SmartLink and free mobile app turns your cell phone or tablet into a virtual PosiTector gauge
The MT Multi-Mode series ultrasonic thickness gauges can switch between pulse-echo and echo-echo modes to eliminate paint / coating thickness. All gauges have data memory, scan mode & adjustable velocity.
The alphaDUR mini UCI hardness tester provides fast and accurate test results and is useful for measuring the hardness of test objects that are too small or thin for other types of portable hardness tester. It is made in Germany by BAQ GmbH.
Measures and records the peak to valley surface profile height of abrasive blast cleaned surfaces. 50 readings per minute for quick and accurate measurement of surface profile over large flat surface areas. Calibration certificate and 2 year warranty.
The PosiTector SST Soluble Salt Tester measures the concentration of soluble salts (salt contamination) on metal surfaces in accordance with ISO 8502-6, 8502-9. 2 year warranty. Supplied with calibration certificate.
The MT600 Multi-Mode ultrasonic thickness gauge can switch between pulse-echo and echo-echo modes to eliminate paint / coating thickness. It features a tough weatherproof case, colour display, data memory, scan mode, differential mode & adjustable velocit
The Equotip 540 & 550 are rugged & versatile portable hardness testers, suitable for most metals. They offer unmatched ease of operation & have a large and clear display integrated in a specially designed housing for on-site usage in harsh environments.
Triple Echo ignores coatings with no zeroing required. Coating Plus+ measures through coatings up to 20 mm thick. Intelligent Probe Recognition automatically matches probe and gauge. 3 year warranty. Free calibration for the life of the gauge.
Precision gauge for thin material applications (0.15 - 25.4mm). Scan mode (scan area), alarm mode (audible & visual), differential mode. Kit includes probe, couplant, carrying case & NIST Calibration Certificate. DL includes software & cable.
Electronic Surface Profile Gage for Blasted Steel and Textured Coatings Digital spring micrometers measure and record surface profile parameters using Testex Press-O-Film replica tape producing a more accurate peak-to-valley height measurement.
The Sauter TN series ultrasonic thickness gauges feature a large data memory and scan mode. The TN EE models have additional features including 2 measurement modes : pulse-echo and echo-echo to eliminate the need to remove coatings. Optional software.
Featuring auto probe zero, auto probe recognition, auto temperature compensation, the CMX will simultaneously measure the material and coating thickness ! The CMX DL+ has A/B Scan & available with grayscale or AMOLED colour display.
portable testers with the best repetition rate and the greatest accuracy on the market. Equotip Bambino 2 is particularly suitable for quick and easy on-site hardness checks. Equotip Piccolo 2 offers advanced measurement statistics and Piccolink software
The PosiPen is a simple magnetic type coating gauge which can be placed with pin-point accuracy on extremely small parts, and on peaks and valleys. Ideal for measuring non-magnetic coatings such as paint, enamel, plating, hot-dip galvanizing on steel.
PosiTest magnetic pull-off thickness gage for the non-destructive measurement of non-magnetic coatings (paint, enamel, galvanizing, metalizing, plating, etc.) on steel.
The PosiTector BHI Barcol Hardness Impressor measures the hardness of soft metals such as aluminum, aluminum alloys, copper, brass, and other materials such as harder plastics, and fibre-reinforced plastic
The PosiTest PC Powder Checker measures uncured powder coatings using non-contact ultrasonic technology to predict a cured thickness.